More durability edges without the weight
We use hardened steel edges that are 33% thinner than our other J skis for reduced weight while still maintaining strength. We reduce the thickness by 0.2mm which is actually still thicker than other brands "light weight" skis, so they are far more durable if you accidentally hit a rock, while maintaining a much longer life when re-tuning.

Faster, lighter durable base material you can count on
We use a 30% thinner base that is 0.2mm thinner than our other J models to shave weight while still providing extreme durability. This base is actually thicker than other brand's "light weight" skis to guarantee you have far more durability when charging down. In addition our sintered Ultra High Molecular Weight (UHMW) Polyethylene is actually the highest quality base material available built to absorb wax better, slide faster, and last longer. Yup! Hard, fast and lasts longer... just like your _______ likes.

Absorbs vibration and dramatically reduces risk of delam
Think of a ski’s construction like a magazine, each page = layers of material in the ski. Then bend your magazine you’ll see every page slide against each other, this is “shear”. This shear force trys to separate, thus delaminate all the layers in your ski every time it’s flexed or the tips are slapped down on a jump landing. This is why I run a layer of thin rubber around the full perimeter of the ski over the entire edge, plus the full width of across the tip and tail. The rubber acts as an insulator so that the edge and other materials can slide against each other when flexing without delaminating. This dramatically improves durability & reduces vibration.

Light weight, durable wood core for the best up and down performance
These skis feature an Aspen wood core for maximum weight reduction while maintaining the torsional resilience and dampening not found on other brand's "light weight" skis. Aspen dramatically reduces weight, giving the ski an incredibly nimble feel. The result is the best of both worlds, a ski that is light for easy ups and maneuverability, yet with power, stability and durability not typically found on other brand's lighter weight skis.

Maximum impact resistant & vibration dampening
We’re using super durable, high impact absorbing Ultra High Molecular Weight (UHMW) polyethylene for our sidewalls. This is the same material we use on our ski's bases. It’s very impact resistant and since it’s full height, it also absorbs more vibration like using a longer spring in your car’s suspension. Take a metal pipe and hit it against a rock, then do the same with a piece of plastic. The metal vibrates through to your bones & the plastic absorbs the vibration for you. That’s the difference of having full height plastic shock absorbing sidewalls over your edges or not. We’re cutting the sides of the sidewalls to a 10* angle, with a nice step at the bottom for easy tuning like race skis.

Fibers run in 4 directions to maximize energy & strength
Fiberglass works like a guitar string, when it is flexed it wants to spring back, that’s the energy or pop you feel in a ski. However this energy can only be applied in the direction the actual fiberglass is run. This means the more directions of fiberglass, the more energy, pop & responsiveness. Industry standard “Triaxial” fiberglass runs in only three directions, we use a Quasi Isotropic fiberglass configuration, same as the aerospace industry to maximize energy & strength in as many directions as possible, 4 different axis 0, 90, +45, -45. It costs more, but it’s worth the performance.