The Slacker "Uphill Both Ways - Ahmet's Bro x J Collab "
Gallery
View Gallery
LIMITED EDITION GRAPHIC
Specs & Construction| Model: | The Slacker |
|---|---|
| Graphic: | Uphill Both Ways - Ahmet's Bro x J Collab |
| Total Made: | 350 Pair |
| Dimensions: | 136-110-128 (Tip - Waist - Tail) |
| Public Release: |
The Slacker™ "Uphill Both Ways - Ahmet's Bro x J Collab " Graphic
Yup! This is the fastest graphic in the world. No, really.... it is! Everyone else tried making lighter touring skis from the inside out, instead of from the outside in, ahaa! That's why these skis are really, really fast on the outside, but deep down inside they charge harder than the rest of them. You'll have your head cocked back laughing as you pass the spandex skimo's on the way uphill... and down!
Of course this genius idea was conceived by none other than "Ahmet's Brother", the skier previously known as Giray Dadali. We decided to keep this collaboration extremely limited since we could only mine enough of the "skimo-graphic" material to print 350 pair on the new "Slacker" ski. In total we melted down over 1,000 pair of XC skis to build these. I then hand-signed and numbered each pair. Grab yours before these previously thought to be impossible enigmas wrapped inside a riddle sells out!
Follow Giray on Instagram
The Slacker™ Model Info
The Slacker™
136-110-128“The Slacker” is an all-terrain freestyle ski designed with uphill efficiency, while maintaining the solid, intuitive downhill performance J skis are known for. Built with the backcountry in mind, its weight-conscious aspen core construction coupled with maple running over the edges gives it a light yet one-of-a-kind solid feel. There's a subtle tail notch in the tail for reliable skin tail clip retention making touring easy without looking like a skimo nerd. We also offer pre-cut Pomoca skins that fit perfectly and are ready to go touring right out of the box! Unlike others, the Slacker is at home ripping around the resort as it is out of bounds, leaving traditional uphill specific skis behind. Smash, surf, play and have more fun adventuring off the beaten path. Go earn ‘em! #JSlackerSki
The Slacker™ Specs
| LENGTH | 176cm | 182cm | 188cm |
| DIMENSIONS | 136-110-128mm | 136-110-128mm | 136-110-128mm |
| SIDECUT RADIUS | 18.1m | 19.5m | 21.2m |
| WEIGHT PER SKI | 1740g | 1830g | 1920g |
| EFFECTIVE EDGE | 1440mm | 1500mm | 1560mm |
| CAMBER | 3mm | 3mm | 3mm |
| ROCKER HEIGHT TIP / TAIL | 8 / 3mm | 9 / 3mm | 10 / 3m |
| TIP / TAIL LENGTH | 270 / 120mm | 325 / 140mm | 445 / 195mm |
| TIP / TAIL HEIGHT | 70 / 35mm | 70 / 35mm | 70 / 35mm |
| BOOT FROM TAIL | 800mm | 830mm | 860mm |
The Slacker™ Construction
I’ve spent over two decades designing, developing, and continually refining the industries most innovative and award winning skis ever created. Now that I’m selling skis directly to you, I’m able to invest more money into using the most expensive, highest quality materials possible, sparing no expense like never before in the name of premium ski performance & durability. You’ll literally feel the difference the moment you make your first turn and still be stoked, years later like it was still your first day on them! This is why I confidently back all my skis with a money back 100% satisfaction guarantee. Learn more about this ski’s construction below…
Play Video
Full Height Sidewalls
Maximum impact resistant & vibration dampening
We’re using super durable, high impact absorbing Ultra High Molecular Weight (UHMW) polyethylene for our sidewalls. This is the same material we use on our ski's bases. It’s very impact resistant and since it’s full height, it also absorbs more vibration like using a longer spring in your car’s suspension. Take a metal pipe and hit it against a rock, then do the same with a piece of plastic. The metal vibrates through to your bones & the plastic absorbs the vibration for you. That’s the difference of having full height plastic shock absorbing sidewalls over your edges or not. We’re cutting the isdes of the sidewalls to a 10* angle, with a nice step at the bottom for easy tuning like race skis.
Sintered Base
The fastest, thickest, most durable base material
I don’t match my clothes, but I always match my base & edge. We use the thickest edge so I also use the thickest base in the industry 1.8mm. I use sintered Ultra High Molecular Weight (UHMW) Polyethylene, the highest quality base material available. It absorbs wax better, slides faster, and is more durable than any other base material. Basically it’s super hard & fast, like your _______ likes it.
Rubber Laminate
Absorbs vibration and dramatically reduces risk of delam
Think of a ski’s construction like a magazine, each page = layers of material in the ski. Then bend your magazine you’ll see every page slide against each other, this is “shear”. This shear force trys to separate, thus delaminate all the layers in your ski every time it’s flexed or the tips are slapped down on a jump landing. This is why I run a layer of thin rubber around the full perimeter of the ski over the entire edge, plus the full width of across the tip and tail. The rubber acts as an insulator so that the edge and other materials can slide against each other when flexing without delaminating. This dramatically improves durability & reduces vibration.
Quasitropic Fiberglass
Fibers run in 4 directions to maximize energy & strength
Fiberglass works like a guitar string, when it is flexed it wants to spring back, that’s the energy or pop you feel in a ski. However this energy can only be applied in the direction the actual fiberglass is run. This means the more directions of fiberglass, the more energy, pop & responsiveness. Industry standard “Triaxial” fiberglass runs in only three directions, we use a Quasi Isotropic fiberglass configuration, same as the aerospace industry to maximize energy & strength in as many directions as possible, 4 different axis 0, 90, +45, -45. It costs more, but it’s worth the performance.
High Definition Digital Printing
You already know I put a lot of value in graphics! So instead of traditional silk screening with low resolution image quality, you’ve seen the dots! I’m using a state of the art, Fuji UV Flat bed printer, a $170,000 machine that enables me to print high resolution from my computer directly to the plastic top & base. The resolution is unbelievable photo-real so you’ll be one of few skiers in the world with skis looking this good on your feet.
The Slacker™ Awards
Blister Recommended 20/21 - Slacker
"The Slacker does a great job of maintaining much of the predictability, versatility and playfulness of J's other skis, just in a lighter package. The Slacker is a solid choice for directional skiers seeking something forgiving and maneuverable, and it's one of the best here for freestyle-minded folks. Almost everyone has a reason to check out The Slacker—especially if you equally split your time inbounds and out."
Freeskier Mag Editors' Pick 2021 - Slacker
"This is the perfect crossover ski; light, playful and stable. It has great edge-to-edge feel that makes turning feel like buttering bread with a warm knife. For the sidecountry hustler or the skier who wants a true one-ski quiver, the brand-new Slacker is your ticket to glory."
Powder Magazine Skier's Choice 2021 - Slacker
"While lightweight, you won't sacrifice performance coming back down. If your goal is to play on bigger lines and sidecountry powder, The Slacker will help you achieve it. Maple stringers close to the edges give The Slacker torsional bite and balance with an effortless pivot into each turn. Aspen core and carbon stringers keep weight low so you might even have some gas left for multiple laps."The Slacker™ Reviews
Share Your Shred
These skiers ride The Slacker™. Tag your photos #JSlackerSki on Instagram.
"Uphill Both Ways - Ahmet's Bro x J Collab " Limited Edition Owners
Where are you?
GET EARLY ACCESS NOW